OSMO/Saicos Floor Brush
SKU:
$59.59
$59.59
per item
This floor brush is 220 mm wide (8.66"), made especially for applying Original Polyx-Oil, Saicos Hardwax Oil, and all related Wood Wax and Color Wax finishes. It's a convenient and effective way to get great results.
Thread a standard extension pole into the metal base.
DIRECTIONS FOR USE
- Stir the Polyx-Oil/Hardwax finish well and pour into a tray.
- Take the Floor Brush and dip approximately 1cm into product.
- Brush the Polyx-Oil/Hardwax Oil very thinly and evenly onto the wood floor following the grain in a back-and-forth scrubbing motion.
- Take care to avoid brush-stops, excessive areas of product
- Store the brush in a plastic bag overnight to prevent drying
- Clean with Brush Cleaner and Thinner
TIPS
The Floor Brush should only be saturated lightly. Please be aware that Polyx/Hardwax Oils have a high yield (see product label). Product excesses and brush marks must be blended and smoothed out immediately.
After finishing work, the Floor Brush can be wrapped in plastic wrap and kept airtight until required for the 2nd coat the next day.
Saicos Ecoline Hardwax Oil
$68.00 - $170.00
Saicos Ecoline Hardwax-Oil creates a beautiful, natural and durable surface. It is part of a coating system especially produced for wood, cork and bamboo floors and heavily used furniture surfaces.
An open-pored penetrating surface finish based on natural plant raw materials (oils and waxes). It combines the advantages of an oiled wooden surface (natural beauty of the wood gets emphasized) with an exceptional high abrasion resistance and durability.
It's microporosity allows the floor to breathe, to help keep moisture from getting trapped; useful in wet spaces such as kitchens.
It is very easy to clean and maintain. Normal daily cleaning with mop, duster or vacuum cleaner. Can be mopped damply with Ecoline Wash Care. Persistent dirt and stains (e. g. from rubber soles) can be removed with Ecoline Wax Care. Can be spot repaired and refinished without resanding the old finish off -- Clean surface with Ecoline Magic Cleanser first. No sanding required. We recommend a slight sanding of the surface (grain 150) and a subsequent new coat of Ecoline Hardwax-Oil on the cleaned surface. Surfaces previously finished with Ecoline Hardwax-Oil must be renovated with Ecoline Hardwax-Oil. In case of renovation in bathroom we recommend the usage of Saicos Premium Hardwax-Oil.
The Ecoline system is healthy-living and breathable. It is in line with the VOC guideline 2010, slip resistant R9. Saliva and sweat resistant acc. DIN 53160 T.1+2.
Complies with the migration behavior according to DIN EN 71T.3.
DIBt approval: Z-157.10-103.
Coverage depends on wood species and surface structure: approx. 35 m2 (approx 376 sq feet) (2 coats).
An open-pored penetrating surface finish based on natural plant raw materials (oils and waxes). It combines the advantages of an oiled wooden surface (natural beauty of the wood gets emphasized) with an exceptional high abrasion resistance and durability.
It's microporosity allows the floor to breathe, to help keep moisture from getting trapped; useful in wet spaces such as kitchens.
It is very easy to clean and maintain. Normal daily cleaning with mop, duster or vacuum cleaner. Can be mopped damply with Ecoline Wash Care. Persistent dirt and stains (e. g. from rubber soles) can be removed with Ecoline Wax Care. Can be spot repaired and refinished without resanding the old finish off -- Clean surface with Ecoline Magic Cleanser first. No sanding required. We recommend a slight sanding of the surface (grain 150) and a subsequent new coat of Ecoline Hardwax-Oil on the cleaned surface. Surfaces previously finished with Ecoline Hardwax-Oil must be renovated with Ecoline Hardwax-Oil. In case of renovation in bathroom we recommend the usage of Saicos Premium Hardwax-Oil.
The Ecoline system is healthy-living and breathable. It is in line with the VOC guideline 2010, slip resistant R9. Saliva and sweat resistant acc. DIN 53160 T.1+2.
Complies with the migration behavior according to DIN EN 71T.3.
DIBt approval: Z-157.10-103.
Coverage depends on wood species and surface structure: approx. 35 m2 (approx 376 sq feet) (2 coats).