PolyWhey Exterior Wood Stain
SKU:
$82.75
$23.95 - $399.65
per item
Vermont Naturals Exterior Penetrating Wood Stain combines the power of PolyWhey technology with micro science to deliver an exterior finish that establishes a new level of performance and ease of application.
Exterior Penetrating Wood Stain delivers color and waterproofer deep into wood for lasting beauty and protection against moisture and UV. Provides protection against mildew, mold and harmful UV rays.
Very low VOCs (45 g/l), no formaldehyde or other toxic ingredients.
Use on decks, fences, railing, outdoor furniture, and other wood surfaces.
A neutral odor
Excellent flow
Great coverage: 200-400 square feet per gallon depending on wood species and surface
Quick drying
Easy clean-up with soap and water
May be used on new wood, pressure-treated wood, weathered wood, and previously coated wood.
NOTE: Color images are approximate. You should expect your actual color to vary depending on the wood, surface, application method, lighting, and other variables.
Exterior Penetrating Wood Stain delivers color and waterproofer deep into wood for lasting beauty and protection against moisture and UV. Provides protection against mildew, mold and harmful UV rays.
Very low VOCs (45 g/l), no formaldehyde or other toxic ingredients.
Use on decks, fences, railing, outdoor furniture, and other wood surfaces.
A neutral odor
Excellent flow
Great coverage: 200-400 square feet per gallon depending on wood species and surface
Quick drying
Easy clean-up with soap and water
May be used on new wood, pressure-treated wood, weathered wood, and previously coated wood.
NOTE: Color images are approximate. You should expect your actual color to vary depending on the wood, surface, application method, lighting, and other variables.
Application notes:
Application steps:
Precautions: This product does not contain formaldehyde or other toxic ingredients that would require protective clothing. However, for those who are chemically sensitive or who will use product over a long period of time, we recommend wearing protective gloves and safety glasses with side shields.
- Two coats of finish are recommended for full protection. Second coat must be applied while the first coat is still damp (if the first coat fully dries the second coat will not be able to penetrate).
- This product is not recommended for use on IPE, Mahogany, or other exotic woods.
- Do not apply when rain is expected in the next 48 hours.
Application steps:
- Stir well prior to use.
- Always test the stain on a sample piece of wood to confirm compatibility and desired appearance.
- If wood has been previously coated, sand to remove all film build to allow Penetrating Stain to penetrate the wood. Apply with brush, paint pad, foam brush or spray. Do not thin. Thinning will result in reduced product performance. Apply an even coat with the grain of the wood and maintain a wet edge. Coat the end grain of all exposed boards.
- Two coats are recommended. Apply second coat while the first coat is still damp. Do not sand between coats.
- Apply when air and surface temperatures are between 50 and 80 degrees Fahrenheit and relative humidity of 40%-60%.
- Under normal conditions treated wood will be fully cured in 48 hours. One gallon will cover approximately 200-400 sq ft. depending on the porosity of the wood.
Precautions: This product does not contain formaldehyde or other toxic ingredients that would require protective clothing. However, for those who are chemically sensitive or who will use product over a long period of time, we recommend wearing protective gloves and safety glasses with side shields.