Pure Tung Oil
SKU:
$17.89
$17.89 - $73.79
per item
Pure Tung Oil has been known for centuries to the Chinese, where the building trades use it as a treatment for both stone and wooden structures; marine trades use it as a preservative and water repellant on wooden boats. It is said to have been introduced to the Western world by Marco Polo.
This product is not to be confused with polymerized tung oil products. It has many uses, including butcher blocks, floors, furniture, fences, garden posts, and more.
Features:
Ingredients: Also known as Chinawood Oil, Tung Oil is manufactured by pressing the tung nut, the seed of the deciduous tung trees Aleurites fordii and Aleurites Montana. No petroleum distillates, thinners, driers or other additives.
This product is not to be confused with polymerized tung oil products. It has many uses, including butcher blocks, floors, furniture, fences, garden posts, and more.
Features:
- Forms a tough, flexible waterproof finish
- Matte finish; does not form a glossy finish no matter the number of coats
- Excellent for outdoor finishes
- Zero VOCs
- Naturally polymerizing finish; builds quickly; consolidates the wood surface
- Cures by oxidation not evaporation
- Resists abrasion, acids, and marring; does not blister and peel (when properly applied, of course)
- Does not blister or peel; nor mold, mildew, bleed or darken with time like linseed oil
- FDA approved for food contact
- Has a light nutty odor
- packaged in #2 HDPE recyclable semi-transparent bottles
- Processed in eastern Tennessee
Ingredients: Also known as Chinawood Oil, Tung Oil is manufactured by pressing the tung nut, the seed of the deciduous tung trees Aleurites fordii and Aleurites Montana. No petroleum distillates, thinners, driers or other additives.
Application Guidelines:
Coverage (per coat):
8 oz. covers 25 sq. feet
16 oz. covers 50 sq. feet
32 oz. covers 100 sq. feet
Gallon covers 400 sq. feet one coat
This is coverage for the oil only and not diluted with Citrus Solvent.
- Apply the first coat liberally. You can rub it with a soft rag. Allow to sit for 20 minutes so the oil can soak in, then remove any excess with clean soft rags. Check after about a half-hour for any seeping and rub this off as well.
- Let dry completely (24-48 hours) between coats. For woods with very open pores, allow an extra 24 hours drying time.
- Can be applied pure or thinned with Citrus Solvent (or mineral spirits or turpentine, if needed) by 50%. Thinners can accelerate the drying process and greatly improve the penetration by cutting the first coat of oil.
- The number of coats will be determined by the intended use of the piece. 2-4 coats are enough for decorative work, paneling and moulding. Surfaces that receive moderate to heavy use or handling could need up to 6 coats for maximum protection, plus a light renewal coat a couple of times a year. Because of this, the coverage per bottle may vary greatly.
- Apply till the surface reaches the saturation point. This will be evidentáas the surface will not absorb more oil. Renewal and building coats are quickly applied with cheese cloth, a lint free cloth or old nylon stockings. This process will give you a surface that will stand up to vigorous use and spills: water will bead on the surface.
- Will store for years. It should be kept in an airtight container with minimum air space.
Coverage (per coat):
8 oz. covers 25 sq. feet
16 oz. covers 50 sq. feet
32 oz. covers 100 sq. feet
Gallon covers 400 sq. feet one coat
This is coverage for the oil only and not diluted with Citrus Solvent.