AFM Safecoat Naturals Oil Wax
SKU:
$6.00
$6.00 - $499.88
per item
Help rejuvenate, weatherproof and enhance the beauty of interior woods.
An organic plant-based, organically produced, premium finish hardener and sealer for unfinished woods
An ideal choice for all new and old unfinished wood, bamboo and other interior wooden surfaces including children's furniture and toys, wood floors, timberwork, paneling and trim
Creates a durable, water repellent, water-mark resistant finish and sealer, enhancing and maintaining wood beauty and breathability.
Ingredients: Contains a sophisticated combination of natural resins and waxes. Polymerized Linseed Oil, Organic Safflower Oil, China Wood Oil, Sunflower Oil, Carnauba Wax, Microcrystalline Wax, Modified Soybean Oil, Hemp Oil, Isoaliphate, Carboxylate Metallic Salts of Calcium Mangenese & Zirconium. Contains no solvents or toxic ingredients such as harmful preservatives, dryers, biocides, lead, cobalt or citrus drying compounds.or other irritants that can contribute to poor indoor air quality or negative health consequences.
An organic plant-based, organically produced, premium finish hardener and sealer for unfinished woods
An ideal choice for all new and old unfinished wood, bamboo and other interior wooden surfaces including children's furniture and toys, wood floors, timberwork, paneling and trim
Creates a durable, water repellent, water-mark resistant finish and sealer, enhancing and maintaining wood beauty and breathability.
Ingredients: Contains a sophisticated combination of natural resins and waxes. Polymerized Linseed Oil, Organic Safflower Oil, China Wood Oil, Sunflower Oil, Carnauba Wax, Microcrystalline Wax, Modified Soybean Oil, Hemp Oil, Isoaliphate, Carboxylate Metallic Salts of Calcium Mangenese & Zirconium. Contains no solvents or toxic ingredients such as harmful preservatives, dryers, biocides, lead, cobalt or citrus drying compounds.or other irritants that can contribute to poor indoor air quality or negative health consequences.
Sold Out
Application: Every species of wood, and every piece of wood within a species, is unique and will react differently to a natural product. For example, soft or porous woods such as pine, alder, birch, fir, cedar and redwood may absorb oil unevenly; some woods may contain tannins and other extractives that will bleed through to the surface and affect appearance. Accordingly, ALWAYS conduct several test patches or a test coat to ensure compatibility and acceptability of appearance before application to the entire surface.
Coverage: will vary depending upon the type, age, and porosity of the wood and on the number of coats applied. Test patches will provide a good indication of likely coverage. In general, when applied in wet-on-wet coats to weathered wood, one gallon will cover from 125-250 square feet; on new, relatively non- porous wood, from 250-450+ square feet.
- Although Safecoat Naturals Oil Wax Finish contains no formaldehyde or other toxic ingredients and requires no special protective equipment to apply, assure good ventilation throughout use and while product is drying.
- Protect adjacent surfaces not to be coated, including plants.
- Stir product thoroughly prior to use and occasionally during use. Do not thin.
- The temperature of the room, oil, floor and other surfaces to be coated should be 70-80 ° F to assure good flow and proper curing.
- Unload material from brush by brushing material across the grain of the surface. Work material deeply into the surface. Final brush strokes should smooth material out in the direction of the grain and should blend back into wet areas.
- Allow 15-20 minutes of penetrating time and then apply a second coat, allowing an additional 15-20 minutes of penetrating time before removing excess oil*. Do not allow to puddle.
- Safecoat Naturals Oil Wax Finish may be sprayed using an airless sprayer with 0.11 tip or larger.
- Do not use Safecoat Naturals Oil Wax Finish on small enclosed spaces such as desk or dresser drawers unless they can be exposed to good ventilation. If desired and wood is still absorptive, another coat may be applied after 24 hours.
- Note: these instructions are intended to be general only and not exhaustive. The applicator should determine what preparation and techniques are best suited to the specific surface. Refer to product label for full instructions.
Coverage: will vary depending upon the type, age, and porosity of the wood and on the number of coats applied. Test patches will provide a good indication of likely coverage. In general, when applied in wet-on-wet coats to weathered wood, one gallon will cover from 125-250 square feet; on new, relatively non- porous wood, from 250-450+ square feet.