EBC2 Exterior Surface Cleaner
SKU:
$9.95
$9.95
Blue Bear (EBC2) Exterior Building Cleaner is a blend of natural fruit acids and super infused surfactants. It is ideal for cleaning building exteriors and removing efflorescence, cement film, lime residues, mortar residues, moss and algae, and environmental dirt.
Suitable for use on all natural stones, polished surfaces, aluminum, stucco, fine stoneware, tiles, high-alloyed steel, stainless steel, glass, plastic, ceramics and much more. A top product for cleaning swimming pools. It is also excellent as a basic and maintenance sanitary cleaner.
Coverage: Depending on mixing ratio up to 50-150 sq. ft. per quart.
Application: Depending on contamination, dilute EBC2 1:10 up to 1:30. Spray on building, if needed work with brush or other cleaning tool. Rinse with clean water. For floors, pour or spray on, use a rotating cleaning pad or brush. Pick up dirty water with suction or mop. Rinse with fresh water. If all the dirt has not been removed, repeat the process. As a basic and maintenance sanitary cleaner, mix in a ratio from pure to 1:50.
Warning: Adjacent objects must be protected. Preliminary test should be carried out before starting work. Ideal working temperatures - 40°F to 80°F. Switch off any under-floor heating. When cleaning marble and limestone, ALWAYS test first at a concealed point.
Suitable for use on all natural stones, polished surfaces, aluminum, stucco, fine stoneware, tiles, high-alloyed steel, stainless steel, glass, plastic, ceramics and much more. A top product for cleaning swimming pools. It is also excellent as a basic and maintenance sanitary cleaner.
Coverage: Depending on mixing ratio up to 50-150 sq. ft. per quart.
Application: Depending on contamination, dilute EBC2 1:10 up to 1:30. Spray on building, if needed work with brush or other cleaning tool. Rinse with clean water. For floors, pour or spray on, use a rotating cleaning pad or brush. Pick up dirty water with suction or mop. Rinse with fresh water. If all the dirt has not been removed, repeat the process. As a basic and maintenance sanitary cleaner, mix in a ratio from pure to 1:50.
Warning: Adjacent objects must be protected. Preliminary test should be carried out before starting work. Ideal working temperatures - 40°F to 80°F. Switch off any under-floor heating. When cleaning marble and limestone, ALWAYS test first at a concealed point.
