AFM Safecoat Deckote Concrete Paint
SKU:
$32.88
$32.88 - $83.88
per item
Safecoat Deckote Concrete Floor Paint is a unique waterborne semi-gloss coating for use on dimensionally stable decks including concrete, magnesite, walkways, breezeways and patios. Safecoat Concrete Floor Paint dries to a hard, tough coating yet contains no offensive solvents, fumes or odors. It dries quickly, cleans up with water and provides a tough monolithic film for lasting protection on properly prepared surfaces.
Also suitable for properly primed metal (use a safer metal primer such as Safecoat Transitional Primer), and can be used on primed and properly prepared wooden surfaces with varying degrees of success depending upon environmental conditions and nature of use.
Dries quickly to a tough, monolithic semigloss sheen film for lasting protection on properly prepared surfaces.
Safecoat Concrete Floor Paint is virtually odorless on application and is available in bases for tinting to a wide variety of colors. It is compatible with other Safecoat sealers and coatings to provide additional finish protection, durability and appearances, and worn areas are easy to recoat and repair.
Tintable to pastel and medium-tone colors.
Use the box below to enter your desired color. Please include the color name, number, and fandeck/source. Click "Add to Cart" individually for each color.
Also suitable for properly primed metal (use a safer metal primer such as Safecoat Transitional Primer), and can be used on primed and properly prepared wooden surfaces with varying degrees of success depending upon environmental conditions and nature of use.
Dries quickly to a tough, monolithic semigloss sheen film for lasting protection on properly prepared surfaces.
Safecoat Concrete Floor Paint is virtually odorless on application and is available in bases for tinting to a wide variety of colors. It is compatible with other Safecoat sealers and coatings to provide additional finish protection, durability and appearances, and worn areas are easy to recoat and repair.
Tintable to pastel and medium-tone colors.
Use the box below to enter your desired color. Please include the color name, number, and fandeck/source. Click "Add to Cart" individually for each color.
COVERAGE: Approximately 75 square feet per quart, and 350 square feet per gallon, in one coat depending on surface porosity.
APPLICATION: Intermix (boxing) all cans of the same color to ensure color uniformity before applying. The surface should be completely dry before application. Always have adequate ventilation. Before using, stir well, then apply as is with a high quality nylon or synthetic bristle brush, pad applicator, sprayer, or roller of appropriate nap (3/8” nap recommended). Apply in two or more uniform, thin coats. Cross-roll to avoid lap-marks and holidays. Use an airless sprayer, minimum 2000 p.s.i., with a .015-.017 tip. Use a 60 mesh filter. Always use a painter’s mask when spraying. For best results, this product should not be reduced. Use only during low or moderate humidity conditions. This product is NOT recommended for use on unprimed wood, unprimed metal, vitreous surfaces surfaces with little to no surface profile, or areas subject tosevere hydrostatic pressure or standing water. Use product when air and surface temperature are between 50 - 90° F (10 - 32°C). Do not apply outside if the threat of rain or heavy humidity is imminent within 72 hours of application. Two coats are normally sufficient for most jobs. Additional cure time may be necessary if more than two coats are applied. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine what preparation and techniques are best suited to the specific surface.
DRYING/CURING TIME: Under normal conditions, Safecoat® Concrete Floor Paint dries to touch in 4-12 hours. Allow 24 hours between coats. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55°F. Safecoat® Concrete Floor Paint can be put into service in 12 - 24 hours under most conditions, but will develop its full durability in 3 weeks after applying. Avoid heavy traffic and cleaning for a minimum of 7 days.
APPLICATION: Intermix (boxing) all cans of the same color to ensure color uniformity before applying. The surface should be completely dry before application. Always have adequate ventilation. Before using, stir well, then apply as is with a high quality nylon or synthetic bristle brush, pad applicator, sprayer, or roller of appropriate nap (3/8” nap recommended). Apply in two or more uniform, thin coats. Cross-roll to avoid lap-marks and holidays. Use an airless sprayer, minimum 2000 p.s.i., with a .015-.017 tip. Use a 60 mesh filter. Always use a painter’s mask when spraying. For best results, this product should not be reduced. Use only during low or moderate humidity conditions. This product is NOT recommended for use on unprimed wood, unprimed metal, vitreous surfaces surfaces with little to no surface profile, or areas subject tosevere hydrostatic pressure or standing water. Use product when air and surface temperature are between 50 - 90° F (10 - 32°C). Do not apply outside if the threat of rain or heavy humidity is imminent within 72 hours of application. Two coats are normally sufficient for most jobs. Additional cure time may be necessary if more than two coats are applied. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine what preparation and techniques are best suited to the specific surface.
DRYING/CURING TIME: Under normal conditions, Safecoat® Concrete Floor Paint dries to touch in 4-12 hours. Allow 24 hours between coats. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55°F. Safecoat® Concrete Floor Paint can be put into service in 12 - 24 hours under most conditions, but will develop its full durability in 3 weeks after applying. Avoid heavy traffic and cleaning for a minimum of 7 days.