Auro Anti-Mould Paint
SKU:
$35.89
$35.89
Preventive mold protection thanks to high pH value! Solvent-free, breathable interior white wall paint with high coverage. Auro's anti-mold system offers an alternative to conventional mold removal agents which often contain chlorine compounds and synthetic toxins.
Our system uses a combination of borates in the preliminary applications (#412 & #413), a completely safe, natural, effective and well tested mold remover, and comes in easy to apply spray gun bottles. The last step to ensure the mold does not return is to use this #327: Anti-Mould Paint, which is highly alkaline due to the lime hydrate content--which naturally inhibits mold growth.
Use on: indoor walls and ceilings. Plaster, drywall, concrete, wallpaper, loam, lime-sand brick, mineral substrates. Ideal for window recesses and bathrooms where mold may be a problem due to poor ventilation.
#327 Anti-Mould Paint comes in white only.
Coverage: each 1 Liter pail covers up to approximately 105 square feet.
Our system uses a combination of borates in the preliminary applications (#412 & #413), a completely safe, natural, effective and well tested mold remover, and comes in easy to apply spray gun bottles. The last step to ensure the mold does not return is to use this #327: Anti-Mould Paint, which is highly alkaline due to the lime hydrate content--which naturally inhibits mold growth.
Use on: indoor walls and ceilings. Plaster, drywall, concrete, wallpaper, loam, lime-sand brick, mineral substrates. Ideal for window recesses and bathrooms where mold may be a problem due to poor ventilation.
#327 Anti-Mould Paint comes in white only.
Coverage: each 1 Liter pail covers up to approximately 105 square feet.
Only 1 left!
How to use: Very easy to use: Just apply with a roller or brush. For best results, this paint is part of a system, and should be applied after the use of Auro #412: Mould Eliminator and Auro #413: Mould Stop.
Can be thinned up to 10% with water. Apply 1-2 coats. Allow 24 hours drying time between coats. Coating appears slightly transparent during application, attains full opacity once it is fully dried. Do not work wet-on-wet. Clean-up with water.
Suitable substrates must be able to support load, clean dry, free from oil and grease, and without penetrating substances. Check and, where necessary, remove old coatings, clean thoroughly, sand, carry out test application.
Ingredients: Water, calcium hydroxide, titanium dioxide, colophony-glycerine ester as potassium soap, cellulose. VOCs: 0 g/l. The Anti-mold paint is registered according to the Biocide Regulation at the German Federal Institute for Industrial Health and Safety Standards (BAUA).
Precautions: Product reacts alkaline, like lime or cement mortar. Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear eye/face protection. If swallowed, seek medical advice immediately and show this container or label. Store in original container in a cool, frost-free area. Do not let product go into sewer. Recycle only completely emptied containers.
Can be thinned up to 10% with water. Apply 1-2 coats. Allow 24 hours drying time between coats. Coating appears slightly transparent during application, attains full opacity once it is fully dried. Do not work wet-on-wet. Clean-up with water.
Suitable substrates must be able to support load, clean dry, free from oil and grease, and without penetrating substances. Check and, where necessary, remove old coatings, clean thoroughly, sand, carry out test application.
Ingredients: Water, calcium hydroxide, titanium dioxide, colophony-glycerine ester as potassium soap, cellulose. VOCs: 0 g/l. The Anti-mold paint is registered according to the Biocide Regulation at the German Federal Institute for Industrial Health and Safety Standards (BAUA).
Precautions: Product reacts alkaline, like lime or cement mortar. Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear eye/face protection. If swallowed, seek medical advice immediately and show this container or label. Store in original container in a cool, frost-free area. Do not let product go into sewer. Recycle only completely emptied containers.