- Store & Virtual Showroom
- >
- Paints & Finishes
- >
- Preparation & Protection
- >
- D/2 Biological Solution
D/2 Biological Solution
SKU:
$19.85
19.85
47.95
$19.85 - $47.95
Unavailable
per item
D/2 Biological Solution is highly effective for removing stains caused by mold, mildew, algae, lichens, and air pollutants.
Tested and used by the Department of Veterans Affairs and the National Park Service, D/2 is a biodegradable cleaner that is pH neutral and contains no salts, bleach or acids.
D/2 is a safe, easy to use liquid that removes a broad spectrum of environmental soils and stains from structures and architectural features.
Features and Benefits:
Use on: brick, stone, concrete, wood, vinyl & aluminum siding, fiberglass, metal, paint, and canvas. Furthermore, it is effective on marble, granite, limestone, brownstone, travertine, masonry, terra cotta, concrete, stucco, wood, and other architectural surfaces including monuments, sculptures, and headstones. A contact time of only 10 to 15 minutes followed by scrubbing with a soft nylon or natural bristle brush will loosen most biological and air pollutant staining.
D/2 Application Procedures:
Always do a spot test sample before proceeding with the project. This cleaning solution works best when air and surface temperatures are 45°F or above. Use D/2 undiluted for the best results. In the event of excessive plant exposure, rinse all plants and water in all planted ground areas.
Coverage: 250-350 sq ft per gallon. 60-90 sq ft per quart.
Tested and used by the Department of Veterans Affairs and the National Park Service, D/2 is a biodegradable cleaner that is pH neutral and contains no salts, bleach or acids.
D/2 is a safe, easy to use liquid that removes a broad spectrum of environmental soils and stains from structures and architectural features.
Features and Benefits:
- Fast acting: 10 to 15 minutes contact time for great results
- Biodegradable
- Contains no acids, salts, or chlorine
- pH neutral
- Will not etch metals or glass
- Safer to use around plantings
- Is not a hazardous material and requires no special handling or protection
- Use full strength, no in-field mixing required
- Shelf life of 5 years
Use on: brick, stone, concrete, wood, vinyl & aluminum siding, fiberglass, metal, paint, and canvas. Furthermore, it is effective on marble, granite, limestone, brownstone, travertine, masonry, terra cotta, concrete, stucco, wood, and other architectural surfaces including monuments, sculptures, and headstones. A contact time of only 10 to 15 minutes followed by scrubbing with a soft nylon or natural bristle brush will loosen most biological and air pollutant staining.
D/2 Application Procedures:
Always do a spot test sample before proceeding with the project. This cleaning solution works best when air and surface temperatures are 45°F or above. Use D/2 undiluted for the best results. In the event of excessive plant exposure, rinse all plants and water in all planted ground areas.
Coverage: 250-350 sq ft per gallon. 60-90 sq ft per quart.

D2 Datasheet | |
File Size: | 183 kb |
File Type: |

D2 Specifications | |
File Size: | 167 kb |
File Type: |

D2 Safety Data Sheet | |
File Size: | 103 kb |
File Type: |