AFM Safecoat Polyureseal EXT
Safecoat Polyureseal EXT is a premium quality crystal clear acrylic urethane that provides a tough, durable surface for interior and exterior use on floors, walkways, pool decks, patios and showrooms. Can be applied to raw wood or wood stained with Safecoat DurostainPro wood stains, and concrete or previously painted surfaces that are properly prepared.
Poly EXT is...
- Abrasion Resistant
- Stain resistent
- Non yellowing
- Repels oil, grease, & water
- Healthy and safe, free of human chemical health hazards
- Inert once cured
- Can help to mitigate offgassing of chemicals from surface
COVERAGE: May be rolled, brushed or sprayed. The coverage will vary with surface porosity and profile. You can expect up to 400 square feet per gallon on a smooth surface and between 250-350 square feet per gallon on a rough surface. For best results apply two thin coats. (Use 1/4” or 3/8” nap if using a roller cover).
See important application details below.
Prices include a government mandated Paint Care fee to support appropriate product recycling & disposal.
Drying Time: Dries within 30 minutes and can be recoated in 4 hours. Ready for use in 12 hours. Drying time will vary with weather conditions, air circulation and temperature.
Clean-up: Clean tools and hands with warm soapy water and rinse thoroughly.
NOTE: This product is not to be used over oil-based polyurethanes or oil-based products. It cannot be used over Chalk Painted surfaces. Do not use over pressure-treated wood or on stamped concrete.
Health Precautions: As with all coatings keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.
| Technical Data & Application sheet |
| MSDS |