Acri-Soy Concrete Sealer
SKU:
$49.95
$49.95
per item
A
bio-based penetrating clear satin concrete sealer that is formulated from
advanced chemical technology utilizing soybean oils and modified
acrylics. Soy ester chemistry has a superior ability to effectively
penetrate and protect porous substrate surfaces by creating a molecular
bond and seal for a breathable, yet highly repelling surface protection.
This advanced formulation provides long lasting protection against
moisture, efflorescence, dusting, marring, and stains.
Features:
Coverage: 400-600 square feet/gallon. The higher spread rate and effective penetration is due to the patented soy ester formulation that won't evaporate before getting into the pores of the substrate.
Application Summary: Make sure all surfaces and stains have properly cured per manufacturer instructions. All surfaces must be dry and free of grease, oils, wax, dirt, contaminants, etc., prior to sealer application. Apply material to a dry surface using a brush, pad, 3/8" nap roller or low pressure spray in a thin even coat. Back-roll or wipe where necessary to avoid puddles. One coat application is generally sufficient depending on surface porosity and temperature. If additional coats are required, allow a 1 to 2 hour inter-coat dry time, then apply coat as desired. Reseal your surface every 2 to 3 years or as needed to prolong the life and beauty of your substrate finish.
Features:
- Non-toxic, Non-flammable
- Very low VOC
- Virtually odorless
- Does not alter surface friction
- Water, stain and mar resistant
- Easy, high spread application
Coverage: 400-600 square feet/gallon. The higher spread rate and effective penetration is due to the patented soy ester formulation that won't evaporate before getting into the pores of the substrate.
Application Summary: Make sure all surfaces and stains have properly cured per manufacturer instructions. All surfaces must be dry and free of grease, oils, wax, dirt, contaminants, etc., prior to sealer application. Apply material to a dry surface using a brush, pad, 3/8" nap roller or low pressure spray in a thin even coat. Back-roll or wipe where necessary to avoid puddles. One coat application is generally sufficient depending on surface porosity and temperature. If additional coats are required, allow a 1 to 2 hour inter-coat dry time, then apply coat as desired. Reseal your surface every 2 to 3 years or as needed to prolong the life and beauty of your substrate finish.
Sold Out