Osmo Brush Cleaner & Thinner (1L)
It is made of white spirit that is free of aromatic compounds.
STORAGE: Up to 5 years and longer if can is kept dry and closed tightly.
OSMO Polyx Oil (High Solid)
High-solids version ("The Original Hardwax Oil")
Osmo Polyx-Oils are hardwearing and extremely durable. For interior use only.
Preserves the look and feel of natural wood.
Economical: 2.5 liters covers approx. 300 square feet over 2 coats (approx 90 sqft for a .75 liter can)
Benzene-free solvent — leaves nothing toxic behind when dry.
The surface becomes water-repellent, dirt-resistant and resistant to wine, beer, cola, coffee, tea, fruit juices, milk and water, according to DIN 68861-1A (German Industry Standard)
Repairable: you can buff out scratches and feather in new finish. No need to strip and refinish the entire floor/surface. Also, use the Maintenance Kit, Liquid Wax Cleaner, and Wash & Care for easy upkeep and repair.
Microporous: while it is water repellent, the finish allows the floor to breathe. This is very useful for using in wetter places like kitchens.
Apply with the OSMO Floor Brush or by buffer. Check out the videos below.
AVAILABLE IN FOUR VERSIONS:
Matte (#3031/3055) is very low sheen, almost "dead" finish.
Satin/Matte (#3054) is the original sheen Polyx Oil, also the most popular. A low/medium level sheen level.
Gloss (#3011) adds more gloss sheen to the finish. It is not high-gloss, more of a semi-gloss level sheen.
Neutral/Natural (#3041) is a transparent, matte finish with the goal of creating a neutral effect to minimize color change and preserve the natural character of wood. It is specifically geared to light-colored low-extractive wooden flooring and furniture–for a finish without the permanent wet look. However, please note, the desired results of the color tone may vary depending on the wood species.
OSMO Pro 5125 Polyx Oil (Full Solid)
Full solid, solvent-free version.
Excellent coverage: 1 liter covers approx700 square feet per coat
Fast application with bladed trowel and low speed buffer
Protects wood from the elements while allowing for a natural wood grain feel.
Highly recommended for solid wood and plankwood flooring, blockstrip, OSB and cork floors
Enhances the tone of the wood, repels water and dirt, is resistant to abrasion and extremely hard-wearing.
Healthy: solvent-free and under 50 g/l VOC
Microporous: allows wood to breathe; useful for kitchens, baths and other areas prone to wetness.
Repairable: For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding necessary! Scratches can be buffed out.
For clear: Apply two very light coats
For colors: Apply one coat of OSMO Pro Color Oil and one coat of Pro Polyx Hardwax Oil.
Winner of Green Building Product Dealer 2009 award for best natural wood finish