Premixed sample of Soycrete and colorant. Sample is intended to show the expected color variations on the substrate for which it is intended.
Directions: Apply product sample on your test area with a foam pad or brush, spreading to a thin coat. Allow the product to dry for about 1 hour to observe the final color. The product will darken as it dries, so donÆt be impatient to add thicker coats. You may experiment with simple enhanced variations by blotching areas to lighten or add additional product after the 1 hour dry time to darken. To create various shades from one color, you may thin the product with clean water, up to 10%. YouÆll be amazed at the versatility and unlimited design potential. You may also add colors for multi-tone shades or graphic designs, create simulated grout lines by taping off areas or utilize design stencils for more creative impressions.
The test stain area may be removed with soap and water or degreaser. The longer you allow the product to cure, the more difficult it is to remove. It is recommended to remove within 6 hours.
