Liquid Wax Cleaner (LWC) maintains and refreshes the finish on floors and woodwork finished with OSMO Polyx Oil and other waxed surfaces. It contains carnauba and candillila wax, the same two natural waxes used in Polyx Oil. These are both plant-based waxes that regrow rapidly. Liquid Wax Cleaner also contains medical-quality paraffins and odor-free mineral spirits, both of which are petroleum products. The cleaner does not include biocides or preservatives. Unlike beeswax, it does not lead to water marks. It is easy to use, odorless when dry, buffs to a sheen, and is extremely water-repellent.

Use LWC to easily refresh and repair floors finished with Polyx Oil as needed. Dull marks and traffic patterns in high use areas are normal in a floor with wax as part of the finish and can be easily refreshed. In order to refresh high use areas, such as entry and door ways, clean the surface thoroughly and allow to dry, then use LWC to spot restore the sheen every 3-4 months or as needed. Recommended method: Use the OSMO Opti-Set Mop (attach the Active fibre cloth) and apply a small amount of LWC to the cloth. Rub this into the surface. Allow to dry for 30-60 minutes, until the material dries to a haze. Buff lightly with a soft cotton cloth (you can use either Active fibre cloth or the Micro-mop plush for this light buffing) To repair superficial scratches, stains or ground-in dirt, use a white abrasive pad or 000 steel wool to rub a small amount of LWC into the affected area. Wipe up immediately with a cotton cloth to remove residue so that no excess material is left on the repair area.