Lead-Clean is a multi-purpose, industrial grade lead dust cleaner and paint deglosser. As an interim control and for in-place management, a special formula removes lead dust, the most common cause of lead poisoning. As a multi-purpose cleaner, it attacks other household dirt, dust, stains, grime and other unwanted marks. This user friendly product is water-based, biodegradable and non-flammable. Lead-Clean is designed to react quickly and work efficiently. It is specifically engineered to have excellent wetting action to better penetrate surface soils. Lead-Clean can also be used in conjunction with other lead abatement methods. For use prior to lead paint encapsulation, a special deglossing agent cuts the gloss of paints, helping to insure proper adhesion for encapsulants. As a post paint removal product, it insures effective, time saving clean-up.

Instructions:

Use as a Lead Dust & Multi-purpose cleaner

1. As a Household lead dust cleaner, Lead-Clean should be used full strength. As a commercial lead dust cleaner, multi-purpose cleaner, or post paint removal clean-up product, Lead-Clean may be used full strength or diluted up to 3 to 1 with water.
2. Apply Lead-Clean using a cloth, sponge, trigger spray or garden type sprayer for larger areas.
3. Wipe Lead-Clean onto the surface - work in with a brush or pad for stubborn areas. Allow to dwell on the surface for up to 5 minutes.
4. Wipe down with a wet sponge/cloth and let dry.
5. When repainting after paint removal, let dry approximately 1 Hour before applying new finish.
6. Hepa vacuum where necessary. Inspect visually and with wipe sample where necessary.
7. Use second application when necessary. As a lead dust cleaner, do not reuse applicators.

Use as a Paint Deglosser:

1. Lead-Clean should be used full strength.
2. Clean off surface dirt using a damp cloth.
3. Apply Lead-Clean using a cloth, sponge, trigger spray or garden type sprayer for larger areas.
4. Work Lead-Clean into the surface using brush or pad if necessary. Allow Lead-Clean to dwell on the surface approximately 10-15 minutes.
5. While surface is still wet, wipe down with a dry cloth. If Lead-Clean has dried on the surface, wipe down with a wet sponge and allow to dry.
6. Let dry approximately 1 hour before applying encapsulant or new finish.
7. Inspect visually. Do test patch where necessary.
8. Use second application when necessary.

Coverages: (per gallon)

• Full Strength: 400-450 sq ft
• Diluted 1-1 (makes 2 gals) 800-900 sq. ft.
• Diluted 2-1 (makes 3 gals): 1200-1350sq. ft.
• Diluted 3-1 ( makes 4 gals): 1600-1800 sq. ft.

SAFETY INSTRUCTIONS: Safety goggles or face shield are recommended for eye protection. Protective gloves such as neoprene, nitrile gloves are also recommended. In case of eye contact - flush with plenty of cool water for 15 minutes, lift lids, do not rub. Get medical attention. In case of ingestion - drink water or milk to dilute. Do not induce vomiting. Get medical attention immediately. KEEP OUT OF REACH OF CHILDREN. Dispose of properly.