Hi-Speed Ready-Strip is a paint and varnish remover, capable of removing paint or varnish as quickly as a 1/2 hour. It can remove up to 3 layers in a single application. This water based paint remover is environmentally friendly, contains soy, non-flammable, has a low odor, is water-soluble and does not contain harsh chemicals such as methylene chloride or caustics. It is biodegradable and easy to dispose of. Hi-Speed Ready-Strip is very easy to use. It can be brushed, rolled or sprayed on. Types of Paint Removed: Hi-Speed Ready-Strip will remove most varieties of household paints including oil and water based paints, varnishes, latex, stains, enamels, lacquers, and polyurethanes. Surfaces: Hi-Speed Ready-Strip works on most interior and exterior surfaces, including wood, plaster, metal, masonry, concrete and fiberglass. It is NOT to be used on sheetrock, plastic, rubber or linoleum surfaces. Instructions:

A. Test Patch: Since it is often hard to know the type or amount of paint or varnish on a surface, a small test area should be tested first to determine whether the desired results will be achieved.
B. Preparation: Mask any areas not being stripped with plastic and masking tape.
C. Application and Removal: Pour Hi-Speed Ready-Strip into a tray and apply liberally by brush, putty knife, medium nap paint roller, or airless sprayer. Apply at temperatures between 60°F and 80°F. Leave Hi-Speed Ready-Strip on approximately 1/2 hour to 1 hour. You may notice blistering or what appears to be no reaction at all. Use a paint scraper to lift paint from flat surfaces or a stiff bristle brush for detailed areas. After initial lifting, use a nylon brush or stripping pad with Ready-Strip Wash or light amounts of water for final clean-up of residue. If you are not down to the original surface, re-apply. Let surface thoroughly dry before re-finishing. No need to neutralize (acid wash) surface. Clean tools promptly after use with soap and water.

Coverage: A pint covers approximately 15 square feet.

SAFETY AND FIRST AID INSTRUCTIONS: Rubber gloves and safety glasses are recommended for eye and skin protection. Avoid eye contact. If eye contact occurs, immediately flush with plenty of water for 15 minutes. Avoid prolonged and repeated contact with skin. If skin contact occurs, wash with soap and water. If spraying is expected use NIOSH approved chemical cartridge respirator. If swallowed do not induce vomiting. Give 1 or 2 glasses of water and call physician immediately.