Catch A Drip is a unique drip-irrigation moisture hose that works on zero-pressure with a gravity drip. This extra porous, easy flow hose slowly drizzles the water evenly along the landscape. This makes the hose an excellent connection to rain barrels to irrigate with your collected rain water.

The hose can also be connected to a central air conditioner/air handler's outside drain pipe to capture the condensate to be put to use for irrigation. The attachment slips on and off easily and will fit any standard PVC drain pipe 3/4" or 1/2".

Made from 65% recycled tire rubber.

Made in Florida, USA.

When using with rain barrels, be sure to add the rain barrel adapter.

Instructions:

• No clamps, no screws, no glue--just slides on.
• Extend hose being careful not to kink hose.
• Moisture hose should lay flat and level. It cannot run up hill.
• For best results, slightly bury hose with dirt or mulch so water will not evaporate.
• In the Fall, remove the hose from the rain barrel; flush with water to clean, drain and store indoors.
• Do not allow hose to freeze.
• It is recommended to flush the hose with water twice a year to remove any slime build-up.