Bioshields Floor & Furniture Hardwax (#32) doesnÆt just add a gorgeous, long-lasting satin sheen to floors, doors, wooden furniture and more, but it actually creates a dirt and dust resistant, anti-static seal to help keep things looking cleaner and shinier. Materials should be primed with Bioshield Primer Oil #1 (for less absorbent surfaces and hardwoods in good condition), Penetrating Sealer #5 (for extremely dry and other highly-absorbent woods), or Hard Oil #9.

Application: The surface to be waxed must be dry, non-absorbent, clean, and free of contaminants such as grease or nicotine. On surfaces finished with our oils, the oil must be completely cured before applying this wax. BioShield Hardwax should be applied in a thin, even coat with a lint-free cloth. The surface should then be thoroughly buffed with a dry cloth or brush after two to four hours. Large floors can also be buffed with a white buffing pad on a machine buffer. For an even harder finish, the wax can be rebuffed 2-4 days after the initial buffing. This product requires several days to cure. Freshly waxed surfaces should be kept free of moisture and heavy foot traffic for about a week or so.

Coverage: Approximately 250-500 square feet per 0.40 Liter

Ingredients:Beeswax, Linseed Oil, Orange Peel Oil (d-limonene), Isoaliphatics, Carnauba Wax, Bees Wax, Larch Resin, Essential Oils, and Lead-free Dryers (Zircon, Cobalt Octoat).