MetalCoat Acrylic Metal Primer is an outstanding thermoplastic acrylic emulsion primer fortified with rust inhibiting pigments. It can be used on interior and exterior metal surfaces such as galvanized and masonry, steel, aluminum and non-ferrous metal. It is one of the least toxic metal primers available, formulated without the heavy metals and other hazardous ingredients commonly used. Provides a tough, flexible film, producing outstanding corrosion resistance and excellent adhesion. It is suitable as a finish in a three primer coat application. May be recoated with a variety of other finishes, and is an excellent foundation for Safecoat paints.

Features:

• Extremely low Volatile Organic Compounds (VOCs)
• No exempted solvents, acetone, ammonia, crystalline silica, ethylene glycol, formaldehyde, formaldehyde precursors (chemicals that create formaldehyde once they enter the atmosphere), odor masking agents, heavy metals, or other known toxic materials or suspected carcinogens.
• Very low odor.
• SCS Certified for Indoor Advantage Gold

Coverage:Approximately 300 square feet per gallon in one coat, depending on method of application and surface texture.

Application: Always have adequate ventilation. Before using, stir well by gently rolling container to avoid air bubbles. Pour into another container before applying coating to avoid contaminating main container. Then apply as is, using a quality nylon brush, roller or airless sprayer. Spray coats are recommended above all other application methods. Use an airless sprayer with a .015-.017 tip. Apply full coats for maximum corrosion resistance. A minimum of 1.5 mil thickness (dry film thickness) is needed for protection. Two coats primer are recommended for best results. This product may be tinted if required, with all purpose tinting colorants, but do not exceed two fluid ounces per gallon. Do not apply when air or surface temperature is below 55 degrees F or on damp, foggy days. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine which preparation and techniques are best suited to the specific surface.

Background: AFM Safecoat is like the "Godfather" of the painting industry. For over 25 years they have been working to develop the safest, highest quality and least toxic paints and building products. Today AFM Safecoat is the leading provider of environmentally responsible, sustainable and non-polluting paints, stains, wood finishes, sealers and related green building products.

Downloads (opens in a new browser window)

Spec Sheet

Material Safety Data Sheet (MSDS)