DuroStain is a premium quality, fast-curing flat finish, semi-transparent stain, ideal for interior wood surfaces. It promotes penetration of porous surfaces and has high adhesion for superior protection as a decorative colorant.

• Excellent pigmentation stability and durability
• Use on all interior wood surfaces
• Certified SCS Indoor Advantage Gold
• Contains no aniline dyestuffs, gilsonite or asphalt, aromatic solvents or formaldehyde
• Stains may be mixed together to modify color
• Uses natural mineral pigments and slight variation in color may accordingly occur between batches. Always use material from the same batch for a specific job.
• Coverage: One gallon covers approximately 300 square feet in one coat depending on surface porosity and the intensity of the stain color desired.
• Dry/Cure Time: Under normal conditions, DuroStain dries to touch in one hour and is re-coatable after two hours. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 ° F. Thick application, high humidity or conditions other than normal will cause DuroStain to dry and cure more slowly.

Application: Always have adequate ventilation. Intermix (boxing) all containers of the same color to ensure uniformity before applying. Before using, stir DuroStain well, then apply it evenly without reduction using a high quality nylon or synthetic bristle brush. To adjust intensity of color, best results will be obtained by staining six foot sections (2' x 3') of the surface and wiping off excess stain while it is still wet to achieve the desired intensity of color. Always keep a wet edge. Darkness of stain may be increased by high surface porosity, wiping off less stain, or letting the stain dry longer before wiping. A squeegee applicator can be beneficial when coating large flat surfaces like doors. The shade of the stained surface will be affected by the color and type of wood. Reduce if desired for spraying with up to 1/2 pint of water per gallon. Always use a painter's mask when spraying. Do not apply in direct sunlight. Make sure to wipe off any excess stain which does not penetrate into the wood. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine what preparation and techniques are best suited to the specific surface. Refer to product label for full instructions.