A bio-based penetrating clearásatin sealer that is formulated from advanced chemical technology utilizing soybean oils and modified acrylics. Soy ester chemistry has a superior ability to effectively penetrate and protect porous substrate surfaces by creating a molecular bond and seal for a breathable, yet highly repelling surface protection. This advanced formulation provides long lasting protection against moisture, efflorescence, dusting, marring, and stains.
Features:
- Bio-based soy technology
- Non-toxic, Non-flammable
- Very low VOC
- Virtually odorless
- Does not alter surface friction
- Water, stain and mar resistant
- Easy, high spread application
Use for: Interior or exterior applications, including concrete, wood, masonry, brick walls, brick pavers, stucco, drywall, rammed earth, fiber board, polyfoam, natural stone, unpolished tile, and other applications. It is a required lock-in protective sealer for all SoyCrete concrete stain projects, and one of several available sealers for TimberSoy wood stains.á
Coverage: 400-600 square feet/gallon. The higher spread rate and effective penetration is due to the patented soy ester formulation thatáwon't evaporate before getting into the pores of the substrate.
Application Summary:Make sure all surfaces and stains have properly cured per manufacturer instructions. All surfaces must be dry and free of grease, oils, wax, dirt, contaminants, etc., prior to sealer application. Apply material to a dry surface using a brush, pad, 3/8ö nap roller or low pressure spray in a thin even coat. Back-roll or wipe where necessary to avoid puddles. One coat application is generally sufficient depending on surface porosity and temperature. If additional coats are required, allow a 1 to 2 hour inter-coat dry time, then apply coat as desired.á Reseal your surface every 2 to 3 years or as needed to prolong the life and beauty of your substrate finish.
